Index | index by Group | index by Distribution | index by Vendor | index by creation date | index by Name | Mirrors | Help | Search |
Name: multipath-tools-devel | Distribution: openSUSE Leap 15.2 |
Version: 0.8.2+140.5146cae | Vendor: openSUSE |
Release: lp152.3.6.1 | Build date: Tue Nov 24 00:02:37 2020 |
Group: Development/Libraries/C and C++ | Build host: obs-arm-9 |
Size: 17187 | Source RPM: multipath-tools-0.8.2+140.5146cae-lp152.3.6.1.src.rpm |
Packager: http://bugs.opensuse.org | |
Url: http://christophe.varoqui.free.fr/ | |
Summary: Development libraries for multipath-tools |
This package contains the development libraries for multipath-tools and libmpathpersist.
GPL-2.0-only AND LGPL-2.0-or-later
* Mon Nov 02 2020 Martin Wilck <mwilck@suse.com> - Avoid reading files extensions other than ".conf" from config dir (bsc#1162896; added this note retroactively, it was already solved in multipath-tools-0.8.2+140.5146cae). - Fix wrong usage of "%service_del_preun -n" in spec file (bsc#1178354) * Thu Sep 17 2020 mwilck@suse.com - Update to version 0.8.2+140.5146cae * drop nr_active field, always count active paths (bsc#1125043) * kpartx.rules: fix handling of synthetic uevents (bsc#1161923) * libmpathpersist: limit PRIN allocation length to 8192 bytes (bsc#1165786) * avoid data corruption caused by duplicate alias in bindings file (bsc#1172429) * improve logging for failure to set dev_loss_tmo (bsc#1173060, bsc#1173064) * Fix handling of hardware properties for maps without paths (bsc#1176644) - Backported upstream fixes (bsc#1176670): * multipath: add "-e" option to enable foreign libraries (bsc#1139837) * multipath-tools: add HPE MSA 1060/2060 to hwtable * ALUA support for PURE FlashArray * libmultipath: EMC PowerMax NVMe device config * libmultipath: pathinfo(): don't filter emtpy devnode names * libmultipath: fix ALUA autodetection when paths are down * libmultipath: fix (max_)polling_interval setting logic * libmultipath: count pending paths as active on loads * multipathd: disable queueing for recreated map in uev_remove_map * multipathd: fix check_path errors with removed map * multipathd: add new paths under vecs lock * multipath: deal with delegation failures correctly * Added memory leak testing and fixed various leaks * Various minor fixes, code correctness improvements - Dropped upstream merged patch: * Drop patch: libmultipath-set-enable_foreign-to-NONE-by-default.patch - Added README.alua - Added %check section in spec file - Modernized BuildRequires * Wed Jul 01 2020 mwilck@suse.com - Update to version 0.8.2+23.4b86d66: - Fix handling of incompletely initialized udev devices (bsc#1172157) - Remove ineffective patch for bsc#1172157 * Del patch: 11-dm-mpath.rules-Fix-udev-rule-processing-during-co.patch * Mon Jun 08 2020 Martin Wilck <mwilck@suse.com> - Remove 0%{?is_opensuse} from spec file (jsc#SLE-11854) - Fix udev rule processing during coldplug (bsc#1172157) * Add patch: 11-dm-mpath.rules-Fix-udev-rule-processing-during-co.patch * Fri Sep 06 2019 mwilck@suse.com - Update to version 0.8.2+18.9ff73e7: * Fix premature path reinstantiation with san_path_err_XX (boo#1149319) * Thu Aug 29 2019 mwilck@suse.com - Update to version 0.8.2+17+suse.21ac578: * kpartx: recognize DASD on loop devices again (bsc#1139775) * Pull in SLE15-SP1 patches yet missing upstream - Update to upstream version 0.8.2 (bsc#1148767) * libmultipath: more cautious blacklisting by missing property (don't blacklist paths because of temporarily missing udev properties) * code correctness fixes from coverity and gcc9 warnings * fixes for VPD80/83 parsing - Update to upstream version 0.8.1 (bsc#1148767) * Improve handling of changed WWIDs and temporary failure to obtain WWID. Option "disable_changed_wwids" is now ignored. * Fixes for PATH_PENDING state handling (bsc#1125043) * libmutipath: continue to use old state on PATH_PENDING * libmultipath: disable user_friendly_names for NetApp * various fixes for marginal path code - Update to upstream version 0.8.0 (bsc#1148767) * multipathd: fix pp->initialized state ping-ponging * multipath: blacklist zram devices * Wed Aug 21 2019 Martin Wilck <mwilck@suse.com> - Set default for "enable_foreign" to "NONE" (bsc#1139837) * added libmultipath-set-enable_foreign-to-NONE-by-default.patch * Thu Aug 15 2019 mwilck@suse.com - Update to version 0.7.9+166+suse.1693c88: * multipath.conf.5: document foreign library support * multipath.conf: add "enable_foreign" parameter (bsc#1139837) * Tue Jul 02 2019 mwilck@suse.com - Update to version 0.7.9+164+suse.e41fbd9: * libmultipath: trigger uevents for partitions, too (bsc#1140146) * Tue Jul 02 2019 Martin Wilck <mwilck@suse.com> - Spec file: backported some modernizations from Factory * Remove unused /var/cache/multipath directory * Remove check for multipath maps in %pre and %post * Remove SLE11-specific multipathd service stop / start from %pre / %post * Remove obsolete tools from package description (bsc#1129827) * Add -n to %service_del_{pre,post}un for multipathd.socket * Tue Jun 25 2019 mwilck@suse.com - Update to version 0.7.9+163+suse.7993fed: * mpathpersist: optimize for setups with many LUNs (bsc#1134648) * mpathpersist: add option -f/--batch-file (bsc#1134648) * libmultipath: get_prio(): really don't reset prio for inaccessible paths (bsc#1118495) - Upstream bug fixes from dm-devel (bsc#1139369): * multipath: call store_pathinfo with DI_BLACKLIST * multipathd: fix REALLOC_REPLY with max length reply * libmultipath: make vector_foreach_slot_backwards work as expected * multipathd: fix client response for socket activation (bsc#1133861) - hwtable: add Lenovo DE series (bsc#1125507) * Thu May 02 2019 mwilck@suse.com - Update to version 0.7.9+148+suse.5179c8d: * fix compilation of external programs with -lmultipath (bsc#1133957) * Tue Apr 30 2019 mwilck@suse.com - Update to version 0.7.9+147+suse.689dcaf: * Avoid deadlock situation during udev settle (bsc#1131789, bsc#1125145) - multipath -u: test socket connection in non-blocking mode * Avoid device IO in "multipath -u" (bsc#1125145) * Fix priority handling for offline paths (bsc#1118495) * Fix daemon shutdown issues (bsc#1110060, bsc#1110439) - multipathd: protect all access to running_state - multipathd: allow shutdown during configure() * Thu Mar 14 2019 Martin Wilck <mwilck@suse.com> - Disable kmod()-style dependencies for now (bsc#1119414) * Thu Mar 07 2019 Martin Wilck <mwilck@suse.com> - Fix module name in multipath.conf (bsc#1119414) * The modules-load.d entry must match the filename exactly * Tue Mar 05 2019 Martin Wilck <mwilck@suse.com> - Add kmod(xyz) style dependencies for SLE15-SP1 (jsc#SLE-3853, fate#326579, bsc#1119414) * Tue Mar 05 2019 mwilck@suse.com - Update to version 0.7.9+128+suse.ae29865: - Bug fixes: * multipathd: Fix miscounting active paths (bsc#1125043) * multipathd: avoid null pointer dereference in LOG_MSG (bsc#1127873) * minor fixes suggested by coverity (bsc#1127879) * Fri Jan 11 2019 Martin Wilck <mwilck@suse.com> - Add BuildRequires on suse-module-tools * we need it for regenerate_initrd_posttrans * Wed Jan 09 2019 mwilck@suse.com - Update to version 0.7.9+111+suse.b4232b7: - merged upstream cb4a979a (SUSE bug fixes merged upstream, code-identical to previous release). * Tue Jan 08 2019 mwilck@suse.com - Update to version 0.7.9+109+suse.203c1cf: * multipathd: avoid crash in cli_list_path (bsc#1121134) * libmultipath: fix compilation with older kernel headers (bsc#1121066) - merged upstream fb824725 * Improved NVMe support in both native and dm-mpath mode added basic NVMe ANA support (bsc#1119898, bsc#1118495) * Fix prio output in "multipathd show topology" (bsc#1119897) * multipathd: fix daemon not really shutdown (bsc##1110060, bsc#1110439) * setup_map: wait for pending path checkers to finish (bsc#1118224) * Fri Dec 14 2018 mwilck@suse.com - Update to version 0.7.9+90+suse.f81e290: * libmultipath: Increase SERIAL_SIZE to 128 bytes (bsc#1107179) * Wed Dec 12 2018 mwilck@suse.com - Update to version 0.7.9+89+suse.df77b66: - re-enable "san_path_err_xy" options These have been removed upstream, but they were supported in SLE-15/Leap15.0, so we can't simply throw them away. Improve documentation, mark them as deprecated, but keep the code in place. * Wed Dec 12 2018 mwilck@suse.com - Update to version 0.7.9+85+suse.766b95e: * upstream patch series to make verbosity level 3 less verbose and thus better usable (bsc#1118937) * fix for handling device size mismatch in coalesce_paths() (bsc#1037379) * libmultipath: fix false removes in dmevents polling code (bsc#1116272) * Spec file: remove build dependency on dracut which causes build errors for some distributions * Mon Nov 26 2018 mwilck@suse.com - Update to version 0.7.9+58+suse.0790830: * libmpathpersist: fix off-by-one error in PRIN length check (bsc#1099007) * multipathd: fix mpp->hwe handling when paths are freed (fix possible crash caused by new hardware table code) * Wed Nov 14 2018 mwilck@suse.com - Update to version 0.7.9+55+suse.9fc8439: (note the "55" is due to former merge operations. We actually only have 7 patches on top of upstream. All other patches referenced below as "not upstream" have been merged). * Bump version to 0.7.9 * multipathd: reset delay_wait_checks counter on failure (bsc#1114771) * multipathd: fix irritating "minor number mismatch" message (bsc#1111116) * fix possible failure to shut down (bsc#1110060, bsc#1110439) * upstream "checker overhaul" - cleanups and improvements for path checkers * Upstream fixes for failures handling path initializiation * various small upstream bug fixes. * Wed Oct 03 2018 mwilck@suse.com - Update to version 0.7.7+136+suse.19bb285: Bug fixes from upstream, and SUSE bug fixes * multipathd: try SCSI persistent reservations for SCSI only (bsc#1108875) * libmultipath: allow sysfs_pathinfo to return SKIPPED (bsc#1098458) * libmultipath: Fixup updating paths (bsc#1110418) * multipathd: fix memory leak on error in configure (bsc#1110418) * multipathd: minor fixes (bsc#1110418) * multipathd: function return value tweaks (bsc#1110418) * multipath: fix max array size in print_cmd_valid (bsc#1110418) * libmutipath: don't use malformed uevents (bsc#1110418) * libmultipath: fix null dereference int alloc_path_group (bsc#1110418) * libmultipath: fix memory issue in path_latency prio (bsc#1110418) * libmultipath: fix length issues in get_vpd_sgio (bsc#1110418) * multipathd: decrease log level of uevent messages (bsc#1110586) * multipathd: fix version check for DM_DEV_ARM_POLL ioctl (bsc#1110587) * libmultipath: pathinfo: skip hidden devices (bsc#1110586) * libmultipath: nvme: shorter topology output (bsc#1082419) * libmultipath: nvme: fix path detection for kernel 4.16 (bsc#1091112) * libmultipath: fix gcc 8.1 "truncated output" warnings (bsc#1099007) * (lib)mpathpersist: use O_RDONLY file descriptors (bsc#1093220) * libmpathpersist: fix byte swapping for big endian systems (bsc#1099036) * multipath-tools/tests: add tests for get_unaligned_beXX (bsc#1099036) * libmultipath: add (get|put)_unaligned_be64 (bsc#1099036) * libmpathpersist: fix stack overflow in mpath_format_readfullstatus() (bsc#1099007) * libmpathpersist: fix typo in mpath_format_readfullstatus (bsc#1099007) * libmpathpersist: remove duplicate test in readfullstatus (bsc#1099007) - Update to upstream 1a8625abd (0.7.7+82) * minor fixes for kpartx, found by coverity * mpathpersist: add --param-alltgpt option * libmultipath: add "protocol" blacklist option. * multipathd: add new wildcard "%P" for "protocol" * multipath-tools: fix products names in hwtable * libmultipath: more debug output in alua prioritizer (bsc#1080965) * libmultipath: alua: retry RTPG for NOT_READY and UNIT_ATTENTION (bsc#1080965) * libmultipath: alua_rtpg: use condlog for error messages (bsc#1080965) * Mon Jul 02 2018 mwilck@suse.com - Update to version 0.7.7+75+suse.6287aef: Added minor updates from upstream * multipath-tools: add info about how to enable ALUA in ONTAP * multipath-tools: add directio path_checker for DASD devices * multipath-tools: make Product Name mandatory and add all of them Minor rebase, as some SUSE patches have been merged upstream (all mentioned in previous changelogs) * Fri Jun 29 2018 mwilck@suse.com - Update to version 0.7.7+72+suse.4b24466: * multipath: fix return code handling in delegate_to_multipathd (bsc#1098177) * multipath: don't start multipathd unnecessarily (bsc#1098177) * Mon Jun 25 2018 mwilck@suse.com - Update to version 0.7.7+70+suse.4a5941e: * libmultipath: change partition_delimiter default to "-part" (bsc#1073622, bsc#1056526) * change default for find_multipaths to "greedy" (bsc#1099054) * libmultipath: allow distributions to change partition_delim default (bsc#1073622, bsc#1056526) * Mon Jun 25 2018 mwilck@suse.com - Update to version 0.7.7+67+suse.a7d1e14: - RBD/RADOS backend support has been removed upstream remove support for it in SUSE, too (boo#1099037, FATE#826853) * added Obsoletes: for multipath-tools-rbd. - libdmmp version has changed to 0.2.0 - New patches not yet upstream: (Wed Jun 12 2018: these are now upstream, since 0.7.8) * multipathd: fix mpp->hwe handling on path removal (boo#1099028) * libmultipath: print correct default for delay_*_checks (boo#1099026, bsc#1110418) * libmultipath: avoid error messages from RDAC check (bsc#1108728, bsc#1075539) * (lib)mpathpersist: use O_RDONLY file descriptors (bsc#1093220) * libmpathpersist: fix byte swapping for big endian systems (bsc#1099036) * multipath-tools/tests: add tests for get_unaligned_beXX (bsc#1099036) * libmultipath: add (get|put)_unaligned_be64 (bsc#1099036) * libmpathpersist: fix stack overflow in mpath_format_readfullstatus() (bsc#1099007) * multipathd: fix buffer size in cli_getprkey (bsc#1099028) * libmultipath: fix gcc 8.1 "truncated output" warnings (bsc#1099007) * libmpathpersist: fix typo in mpath_format_readfullstatus (bsc#1099007) * libmpathpersist: remove duplicate test in readfullstatus (bsc#1099007) - SUSE specific patches preserved: * multipath.rules: temporary rule to obtain ID_WWN for NVMe (bsc#1076828) * kpartx: create symlinks for dmraid devices (bsc#1064212) * multipath.conf.5: document no_partitons compat support (fate#323406) * libmultipath: compat support for 'features "1 no_partitions"' (fate#323406) * Added fossology assessment as README.licenses (bsc#1088801) - Dropped patches from previous factory/SLE15 release (0.7.3+69+suse.218a0d0): * libmultipath: don't [un]set queue_if_no_path after domap obsoleted by "libmultipath: cleanup features handling code" * multipath.rules: use -i flag to multipath obsoleted by path detection patch series * libmpathpersist: add support for prkeys file v3 obsoleted by "mpathpersist: Fix invalid condition check" * libmultipath: fix deadlock in tur.c obsoleted by "libmultipath: fix tur checker locking" * checkers/rbd: missing pthread_lock() on failure path obsolete because of RBD removal * libmultipath/hwtable: don't hard-code ALUA for IBM IPR obsoleted by "libmultipath: hwhandler auto-detection for ALUA" and "libmultipath: don't reject maps with undefined prio" (bsc#1085212, bsc#1075129) - Update to upstream version 0.7.7+50 (39ad8dc8) - rework of "find_multipaths" logic * find_multipaths can now be "strict", "yes", "no", "greedy", or "smart" * SUSE default is "greedy" for now, consistent with previous behavior * "multipath -u -i" not necessary in udev rules any more (removed SUSE patch "multipath.rules: use -i flag to multipath") - patch series for config file handling (bsc#1067789): * fix inconsistent handling of multiple config file entries matching the same device (bsc#1067789) * multipath: implement "multipath -T" (bsc#1067789) * multipathd: implement "show config local" (bsc#1067789) * libmultipath: merge "multipath" config sections by wwid * multipathd: add path format wildcard "%0" for failures * libmultipath: config parser: Allow '"' in strings - multipath-tools: foreign/NVME implementation (bsc#1082419) for native NVME multipath configurations - Other new upstream features: * mpathpersist: add all_tg_pt option * add polling dmevent handler (only one thread waiting for device-mapper events rather than one per map). * multipath: add "ghost_delay" parameter * "marginal path" path state checking for better handling of unstable "shaky" connections in a SAN. conf options "marginal_path_err_rate_threshold" etc, see man page. This replaces the previous "san_path_err_threshold" functionality. - Upstream bug fixes: * Man page corrections and improvements for multipath.conf(5) * libmultipath: fix memory leak in process_config_dir() (bsc#1110352) * multipath: don't check timestamps without a path * multipathd: handle errors in uxlsnr as fatal (bsc#1086025) * libmultipath: don't reject maps with undefined prio (bsc#1085212, bsc#1075129) * multipathd: fix reservation_key check (bsc#1099008) * 11-dm-mpath.rules: dont't run "multipath -U" during coldplug (bsc#1084748) * libmultipath: hwhandler auto-detection for ALUA (bsc#1085212, bsc#1075129) * multipath: fix rcu thread cancellation hang (bsc#1110418) * multipathd: register threads that use rcu calls (bsc#1110418) * multipathd: fix waiter thread cancelling * multipathd: use nanosleep for strict timing (avoids possible races with SIGALRM) * logging fixes: * libmultipath: fix log_pthread processing * libmultipath: set dm_conf_verbosity * libmultipath: fix basenamecpy * libmultipath: uev_update_path: update path properties * libmultipath: uev_update_path: always warn if WWID changed * libmultipath: get_uid: don't quit prematurely without udev (bsc#1108728) * libmultipath: get_uid: check VPD pages for SCSI only (bsc#1108728) * libmultipath: fix wrong output of "multipath -t" * Introduce the libmultipath/unaligned.h header file (bsc#1099036) * libmultipath: Fix sgio_get_vpd() (bsc#1099484) * kpartx: Improve reliability of find_loop_by_file() * libmultipath, alloc_path_with_pathinfo(): Ensure that pp->wwid is '\0'-terminated * libmultipath: enable feature disable changed wwid by default * multipathd: add lock protection for cli_list_status * bug fixes for "marginal path checker" * multipathd: fix signal blocking logic (bsc#1110060, bsc#1110439, bsc#1086025) * multipath-tools: add INSPUR/MCS to hardware table * multipath-tools: add RDAC SUN/ArrayStorage to hwtable * multipath-tools: remove DF arrays from HP * multipath: print sysfs state in fast list mode (bsc#1110354) * multipathd: remove coalesce_paths from ev_add_map * multipath: fix DEF_TIMEOUT use * libmultipath: fix tur checker locking * multipath-tools: handle exit signal immediately (bsc#1086025) * multipathd: release uxsocket and resource when cancel thread (bsc#1110355) * path latency prioritizer fixes * multipathd.service: set TasksMax=infinity (bsc#1060616) * multipathd.service: drop Before=lvm2-lvmetad.service (bsc#1070427) * multipathd.socket: add WantedBy=sockets.target * kpartx.rules: fix by-id/scsi-* for user_friendly_names * multipath -C: decrease log level * libmultipath: hwtable: no_path_retry="queue" for NetApp NVMe * libmultipath: hwtable: multibus for NetApp NVMe-FC * libmultipath: select ALUA prioritizer for RDAC arrays only (bsc#1075539, bsc#1081241) * libmultipath: get_vpd_sgio: support VPD 0xc9 (bsc#1055949) * libmultipath: condlog: log to stderr (bsc#1055949) * multipath: delegate dangerous commands to multipathdd (bsc#1047639) * libmultipath: don't try to set hwhandler if it is retained (bsc#1047639) * libmultipath: don't update path queueing on reload * multipathd: marginal path code fixes * multipath: check failed path dmstate in check_path * multipathd: clean up set_no_path_retry * multipathd: fix device creation issues * libmultipath: cleanup features handling code * multipath: fix hwhandler check in select_action * kpartx: don't delete partitions from partitions * limbultipath: prefer RDAC checker with detect_checker * multipath-tools: add AccelStor/NeoSapphire to hardware table * multipath-tools: add TMS/RamSan to hardware table * multipath-tools: add XIV/NEXTRA to hardware table * multipath-tools: add XIOtech/Magnitude to hardware table * libmultipath: ensure checker->fd == -1 if not set * Thu Apr 12 2018 mwilck@suse.com - Update to version 0.7.3+69+suse.218a0d0: * multipath -ll: print foreign maps only with "-o" flag (bsc#1089353) * Revert "disable nvme foreign library" * Thu Apr 12 2018 mwilck@suse.com - Update to version 0.7.3+67+suse.8f0c27b: * disable nvme foreign library (bsc#1089353) * Tue Apr 10 2018 mwilck@suse.com - No functional changes - Fixed rpmlint warnings (bsc#1088946) * multipath-tools-devel: moved .so files to /usr/lib[64] * added version dependencies for -devel packages * Tue Apr 10 2018 mwilck@suse.com - No functional changes * fixed SPDX syntax (and -> AND) * added /usr/share/licenses * Tue Apr 10 2018 mwilck@suse.com< - No functional changes, just licenses - Spec file: fix %license tags and info after closer inspection (bsc#1088801) * kpartx is under GPL-2.0-only * rbd is under LGPL-2.1-only - Update to version 0.7.3+66+suse.dc5fe2d: Fix licensing info (bsc#1088801) * Added fossology assessment as README.licenses * multipath-tools: create LICENSES dir with the text of all used licences * Fri Apr 06 2018 mwilck@suse.com - Update to version 0.7.3+61+suse.d4d0494: * 11-dm-mpath.rules: dont't run "multipath -U" during coldplug (bsc#1084748) * Wed Mar 28 2018 mwilck@suse.com - Fixed license tags in spec file * multipath tools / libmultipath is GPL-2.0-only * libmpathcmd is LGPL-2.0-or-later * libdmmp is GPL-3.0-or-later * adopt SPDX format. * Wed Mar 28 2018 mwilck@suse.com - Update to version 0.7.3+60+suse.46ac839: * libmultipath/hwtable: don't hard-code ALUA for IBM IPR (bsc#1085212, bsc#1075129) * Wed Mar 21 2018 mwilck@suse.com - Update to version 0.7.3+59+suse.1b6191c26774: * libmultipath: don't reject maps with undefined prio (bsc#1085212, bsc#1075129) * multipathd: handle errors in uxlsnr as fatal (bsc#1086025) * Tue Mar 20 2018 mwilck@suse.com - Update to version 0.7.3+57+suse.bb6be4c8b4ca: * multipathd: fix signal blocking logic (bsc#1086025) * multipath-tools: handle exit signal immediately (bsc#1086025) * multipath: fix DEF_TIMEOUT use (bsc#1086014) * multipath-tools: foreign/NVME implementation v2 (upstream accepted) (bsc#1082419) * Mon Feb 26 2018 mwilck@suse.com - Update to version 0.7.3+53+suse.140f4937e9e7: * libmultipath: fix wrong output of "multipath -t" (bsc#1082835) * Thu Feb 22 2018 mwilck@suse.com - Update to version 0.7.3+52+suse.08a969b7fce0: - Add limited support for displaying native NVMe multipath (bsc#1082419) * libmultipath: foreign/nvme: implement path display * multipathd: use foreign API * multipath: use foreign API * libmultipath/foreign: nvme foreign library * libmultipath/print: add "%G - foreign" wildcard * libmultipath: API for foreign multipath handling * libmultipath: print: use generic API for get_x_layout() * libmultipath: print: convert API to generic data type * libmultipath: "generic multipath" interface * libmultipath: add vector_convert() * libmultipath: add vector_free_const() * libmultipath: get rid of selector "hack" in print.c - Fix locking errors detected by coverity check (bsc#1082418) * checkers/rbd: missing pthread_lock() on failure path * libmultipath: fix deadlock in tur.c * Mon Feb 12 2018 mwilck@suse.com - Fix whitespace in dracut conf file (bsc#1080562) * Tue Jan 30 2018 mwilck@suse.com - Update to version 0.7.3+38+suse.a16beed5280a: * kpartx: don't delete partitions from partitions (bsc#1078362) * hwtable: add latest updates (bsc#1078363) * multipathd.service: set TasksMax=infinity (bsc#1060616) * Fri Jan 26 2018 mwilck@suse.com - Update to version 0.7.3+31+suse.6804bb73f72d: * libmultipath: hwtable: no_path_retry="queue" for NetApp NVMe (bsc#1073319) * Fri Jan 19 2018 mwilck@suse.com - Update to version 0.7.3+30+suse.6b5ed839: * multipath.rules: temporary rule to obtain ID_WWN for NVMe (bsc#1076828) * libmultipath: ignore natively multipathed NVME devices (bsc#1076828) * multipath.rules: handle NVME devices (bsc#1076828) * FIX "libmultipath: hwtable: multibus for NetApp NVMe-FC" (bsc#1073319) * libmultipath: increase path product_id/rev field size for NVMe (bsc#1073319) * Tue Jan 16 2018 mwilck@suse.com - Update to version 0.7.3+25+suse.7c9920e2: * assemble_map: no newline at end of params string (bsc#1072253) * Thu Jan 11 2018 mwilck@suse.com - Update to version 0.7.3+24+suse.703a61d5: * multipathd.service: drop Before=lvm2-lvmetad.service (bsc#1070427) * libmultipath: hwtable: multibus for NetApp NVMe-FC (bsc#1073319) * libmultipath/propsel: select ALUA prioritizer for RDAC arrays only (bsc#1075539, bsc#1081241) * libmultipath: get_vpd_sgio: support VPD 0xc9 (bsc#1055949) * libmultipath: sgio_get_vpd: add page argument (bsc#1055949) * libmultipath: fix return code of sgio_get_vpd() (bsc#1055949) * Fri Dec 22 2017 mwilck@suse.com - Update to version 0.7.3+19+suse.0fd18bdd: * multipathd.socket: add WantedBy=sockets.target (bsc#1072253) * Fri Dec 22 2017 mwilck@suse.com - Update to version 0.7.3+18+suse.8c97f433: * multipath -C: decrease log level (bsc#1072504) * Fri Dec 22 2017 mwilck@suse.com - Update to version 0.7.3+17+suse.cac42e6f: * test-kpartx: add test for mapping without UUID (bsc#1074013) * Wed Nov 29 2017 mwilck@suse.com - Update to version 0.7.3+15+suse.570d5938: * kpartx.rules: fix by-id/scsi-* for user_friendly_names (bsc#1066893) * Mon Nov 20 2017 mwilck@suse.com - Update to version 0.7.3+14+suse.da06e7f3: * libmultipath: fix return code of sysfs_get_timeout (bsc#1069037) * Mon Nov 06 2017 mwilck@suse.com - added sample code for libmpathpersist (bsc#1066376) * added libmpathpersist-example.c - multipath-tools.spec: package libmultipath.so symlink in -devel package (bsc#1066376). We *do not* package header files for libmultipath, as the APIs are not public. * Fri Nov 03 2017 mwilck@suse.com - multipath-tools.spec: package *.so symlinks in -devel pkgs (bsc#1066376) - multipath-tools.spec: SLE15: add RADOS support for s390x (bsc#1066380) - Fix build error for targets SLE_12, SLE_12_SP1 (bsc#1066392) * Thu Oct 26 2017 mwilck@suse.com - Update to version 0.7.3+13+suse.db431514080f: * kpartx: create symlinks for dmraid devices (bsc#1064212) * limbultipath: prefer RDAC checker with detect_checker (bsc#1055949) * Tue Oct 17 2017 hare@suse.com - Update to version 0.7.3+11+suse.4de08d96: * libmultipath: condlog: log to stderr (bsc#1063059) * Thu Sep 21 2017 mwilck@suse.com - Update to version 0.7.3+10+suse.70ccb55b0439: - Rebase to upstream release 0.7.3 * libmultipath: add pthread_cleanup hook for udev monitor * libmultipath: pull functions into util.c * libmultipath: change reservation_key to a be64 * libmpathpersist: fix update_prflag code * multipath: add alternate reservation_key method * mpathpersist: add support for prkeys file * multipath-tools: minor edition and corrections in multipath.conf.5 * multipath-tools: fix incorrect length for strncmp in uevent.c * multipath-tools: clarify how to dump the multipathd config * multipath-tools: replace "setting: array" with "setting: storage device" at multipath output * libmultipath: sanitize fd handling * multipath-tools: link internal libraries before foreigns * multipath-tools: remove Sun StorEdge T4(6020,6120,6320) arrays from hwtable * multipath-tools: add support for all arrays from Sun StorEdge 3000 family * multipath-tools: add Xiotech iglu blaze arrays to hwtable * multipath-tools: add Dot Hill/Seagate arrays to hwtable * libmultipath: update INFINIDAT builtin config * multipath-tools: add info about adding new hardware * multipath-tools: Remove the limitation of IPC command reply length. * multipath-tools: libdmmp: Improve timeout mechanism * multipath-tools: libdmmp: New function to flush and reconfig * Bump version to 0.7.3 - minor fixes for upstream 0.7.3 * libmultipath: ensure checker->fd == -1 if not set * libmpathpersist: add support for prkeys file v3 * multipath: add man page info for my prkey changes - Patch series for NVMe discovery and failover (bsc#1038865, bsc#1057820) * discovery: sanitize NVMe discovery * libmultipath/discovery: modify NVMe path states * Add 'none' checker * hwtable: set 'none' as default checker for NVMe * Mon Sep 18 2017 mwilck@suse.com - Update to version 0.7.2+49+suse.993a29b1188d: * Revert "11-dm-mpath.rules: Remember DM_ACTIVATION" (boo#1059227) * Revert "11-dm-mpath.rules: don't set READY->ACTIVATION" (boo#1059227) * multipath: delegate using libmpathcmd (bsc#1047639) * Mon Sep 18 2017 mwilck@suse.com - split off rados support into separate multipath-tools-rbd package. This avoids pulling in the whole rados/ibverbs/rdma stack with multipath-tools. (bsc#1058504). - multipath-tools-rbd is Recommended but not Required by multipath-tools. * Sat Sep 02 2017 mwilck@suse.com - Update to version 0.7.2+44.3a8d750c: Misc bug fixes: * multipathd: don't flood system with sd_notify calls (bsc#1056011) * libmultipath: add_feature: skip pointless NULL check (bsc#1055635) * libmultipath: add_feature: allow only 1 feature (bsc#1055635) * multipath: delegate dangerous commands to multipathd (bsc#1047639) * libmultipath: fix partition_delimiter config option (bsc#1056526) * kpartx: helper functions for name and uuid generation (bsc#1056508) * kpartx: search partitions by UUID, and rename (bsc#1056508) * kpartx: fix a corner case when renaming partitions (bsc#1056508) * kpartx: -d must work with empty partition table (boo#1056599) * kpartx: only recognize dasd part table on DASD (boo#1056599) Rework of the udev rules related to multipath and kpartx (bsc#1054363): * libmultipath: support MPATH_UDEV_NO_PATHS_FLAG on map creation * libmultipath: add get_udev_device * libmultipath: get_refwwid: use get_udev_device * libmultipath: use const char* in some dm helpers * libmultipath: add DI_NOIO flag for pathinfo * libmultipath: add dm_get_multipath * multipath: implement "check usable paths" (-C/-U) * 11-dm-mpath.rules: multipath -U for READY check * 11-dm-mpath.rules: import more ID_FS_xxx vars from db * 11-dm-mpath.rules: no need to test before IMPORT * 11-dm-mpath.rules: handle new maps with READY==0 * 11-dm-mpath.rules: don't set READY->ACTIVATION * 11-dm-mpath.rules: Remember DM_ACTIVATION * multipath.rules: set ID_FS_TYPE to "mpath_member" * kpartx.rules: don't rely on DM_DEPS and DM_TABLE_STATE * kpartx.rules: respect DM_UDEV_LOW_PRIORITY_FLAG * kpartx.rules: improved logic for by-uuid and by-label links * kpartx.rules: create by-partuuid and by-partlabel symlinks * kpartx.rules: generate type-name links only for multipath devices * kpartx.rules: fix logic for adding partitions * multipath/kpartx rules: avoid superfluous scanning * kpartx/del-part-nodes.rules: new udev file * kpartx.rules: move symlink code to other files - multipath-tools.spec: * added 68-del-part-nodes.rules to support partition deletion * added 00-dont-del-part-nodes.rules to disable partition deletion by default on openSUSE/SLES for now. * added 11-dm-parts.rules to kpartx package * added dracut.conf file to make sure 11-dm-parts.rules is included in initrd * Mon Aug 14 2017 mwilck@suse.com - Update to version 0.7.2+14+suse.5721c345: * cli_add_map: Use CMD_NONE (bsc#1053515) * multipath-tools: link internal libraries before foreigns (bsc#1028132) * multipathd daemon: Fix incorrect use of CLOCK_MONOTONIC in pthread (bsc#1053757) * Fri Aug 11 2017 mwilck@suse.com - Update to version 0.7.2+11+suse.448921a2: * multipath.conf.5: document no_partitions compat support * libmultipath: fixup compat support for 'features "1 no_partitions"' * Fri Aug 11 2017 mwilck@suse.com - Dropped 67-kpartx-compat.rules (SUSE legacy). * symlinks "/dev/mapper/${UUID}_part${X}" are not created any more, only "/dev/mapper/${UUID}-part${X}" (with "minus") - Dropped automatic kpartx invocation on dmraid devices (fate#323743) - Rebase to upstream multipath-tools 0.7.2: * libmultipath: retain_attached_hw_handler obsolete with 4.3+ * multipath-tools: move up TEMPLATE in hwtable * multipath-tools: delete libdmmp/docs/man directory in make clean * libmultipath: fix unit to seconds in log message for checker timeout * multipath-tools: add HPE StoreVirtual 3200 family to hwtable * multipath-tools: add HPE MSA 2050/2052 to hwtable * multipath-tools: add/change fujitsu arrays * multipath-tools: check sysfs path state for NVMe/NVMf * multipath-tools: sync third-party headers with 3.13 upstream * multipath-tools: beautify path_latency.c code * multipath-tools: fix format in multipath.conf.5 * libmultipath: update 3PARdata builtin config * Bump version to 0.7.2 - Update to version 0.7.2+8+suse.95e8f43e: * libmultipath: don't try to set hwhandler if it is retained (bsc#1037533) * libmultipath: don't [un]set queue_if_no_path after domap * kpartx/devmapper.h: remove dm_no_partitions * libmultipath: compat support for 'features "1 no_partitions"' (fate#323406) * kpartx.rules: respect DM_UDEV_LOW_PRIORITY_FLAG (bsc#1047180) * kpartx.rules: Use DM_ACTIVATION as condition (fate#323406) * kpartx.rules: skip creating by-uuid and by-label links (fate#32340) * Thu Jul 20 2017 mwilck@suse.com - Update to version 0.7.1+69+suse.3bfa5af1: * Merge branch 'sles12-sp3-fixes' into sles12-sp3 * libmultipath: get_udev_uid: make sure pp->wwid is 0-terminated (bsc#1048146) * libmultipath: drop uevent_can_discard_by_devpath (bsc#1048052) * libmultipath: only listen for uevents with DEVTYPE=disk (bsc#1048052) * libmultipath: fix over-long NVME WWIDs (bsc#1048146) * Tue Jun 27 2017 mwilck@suse.com - Update to version 0.7.1+64+suse.aabe8c87: * Updated "no_path_retry" patchset to v4 (minor change) * kpartx.rules: Fix syntax error in skip_kpartx code (bsc#1046092) - _service: use "match-tag" to refer only to offical tags * Wed Jun 21 2017 mwilck@suse.com - Update to version 0.7.1+62+suse.62a2c36e: * kpartx: only check for 'no_partitions' feature on dm devices (bsc#1037533) * Revert "kpartx: use mapname if no uuid is present" (bsc#1037533, bsc#1033541) - "no_path_retry" patch series (bsc#1043027) * libmultipath: load_config: skip setting unnecessary defaults * libmultipath: add/remove_feature: use const char* for feature * libmultipath: clarify option conflicts for "features" * libmultipath: merge_hwe: fix queue_if_no_path logic * libmultipath: assemble_map: fix queue_if_no_path logic * multipath.conf.5: document no_path_retry vs. queue_if_no_path * multipath.conf.5: Remove ??? and other minor fixes * libmultipath: add deprecated warning for some features settings - _service: Use "sles12-sp3" branch as revision, as factory and SLE12-SP3 submissions are in sync. Will be changed when factory forks off (latest at SLE12-SP3 GA). * Tue Jun 20 2017 bwiedemann@suse.com - set KBUILD_BUILD_TIMESTAMP to generate reproducible man-pages to fix build-compare (bsc#1045111) * Wed Jun 14 2017 mwilck@suse.com - Update to version 0.7.1+53+suse.07c2f6ac - kpartx patch series from upstream (bsc#1037533, bsc#1033541) * kpartx: only check for 'no_partitions' feature on dm devices * kpartx: test-kpartx: new unit test program * kpartx: remove is_loop_device * kpartx: relax and improve UUID check in dm_compare_uuid * kpartx: dm_remove_partmaps: support non-dm devices * kpartx: dm_devn: return error for non-existent device * kpartx: don't treat multi-linear mappings as partitions * libmultipath: don't treat multi-linear mappings as partitions * kpartx: use partition UUID for non-DM devices * kpartx: use absolute path for regular files * kpartx: find_loop_by_file: use sysfs * kpartx: include sys/sysmacros.h * Revert "kpartx: relax check when checking for a kpartx device" - Spec file: use new build flag for libdmmp installation (bsc#1036652), enabled by upstream fix: * libdmmp: enable library installation in alternative directory - Other bug fixes from upstream: * libmultipath: print.c: make sure lines are 0-terminated (bsc#1038865) * multipath-tools: fix compilation with gcc < 4.9 * kpartx: fix device checks * mpath_persist: Don't join threads that don't exist * libmultipath: fix suspended devs from failed reloads * mpathpersist: fix one more crash possiblity - Minor upstream changes: * multipath: Merge the DELL MD3xxx device configs * multipath: fix up position independent code * libmultipath: fix partition detection (bsc#1037533) * kpartx: default to running in sync mode * libmultipath: force udev reloads * libmultipath: print alias with no_path_retry message * multipathd: force reload device on all resizes * libmultipath: refactor calls to get dm device info * multipath-tools: document uid_attribute for NVME devices * Makefile: Remove assignments to unused variables * libmultipath/configure.h: Add a forward declaration * libmpathpersist: Add two missing #include directives * Remove mpath_reverse_8bytes_order() * Move the declaration of mpath_mx_alloc_len to a header file * Remove a superfluous "extern" keyword * mpathpersist.8: add missing documentation for -K, -C, -l * Thu Apr 27 2017 mwilck@suse.com - spec file: Disable RADOS support for i586 on Leap 42.x (bsc#1036271) - spec file: Move libdmmp to /usr/lib[64] (bsc#1036652) - Update to version 0.7.1+7+suse.3edc5f7d: * kpartx: use mapname if no uuid is present (bsc#1033541) * kpartx: relax check when checking for a kpartx device (bsc#1033541) * libmpathpersist: use extern struct udev (bsc#1027188) * kpartx: include sys/sysmacros.h (fix compilation warning) - Update to upstream version 0.7.1: * multipath-tools: improve processing efficiency for addition and deletion of multipath devices * uevent_can_discard: optimize devpath check * multipathd: fix SIGUSR2 handling * multipath-tools: clean up libdmmp/Makefile * multipath-tools: libdmmp: Fix incorrect use of __attribute__ * multipath-tools: Remove trailing whitespaces * multipath-tools: add missing "-l" flag for pthread in libdmmp/Makefile * multipath-tools: build objects for libdmmp and libmpathpersist independently * libdmmp: minor Makefile cleanup * multipath-tools: remove incdir from Makefiles * libdmmp: don't disconnect from multipathd twice * multipathd: don't call strlen on NULL variables * libdmmp: move libdmmp.pc install location * multipathd: drop lock before calling uev_add_path * multipathd: allow devices to switch from RW to RO * libmultipath: don't set max_sectors_kb on reloads * Remove a trailing tab * multipath: fix segfault with disable_changed_wwids * multipath-tools: amend text from multipath/multipath.conf.5 * Bump the version code and date * multipath-tools: replace multipath configuration output * Revert "multipathd: set timeout for CLI commands correctly" * libmultipath: fix skip_kpartx support for removing maps * Bump version to 0.7.1 * Fri Mar 24 2017 mwilck@suse.com - spec file changes suggested by factory review team (bsc#1030699) * RPM group adjustments. * Avoid %__ macro indirections * Thu Mar 23 2017 mwilck@suse.com - Enable rados for SLES only for x86_64 and aarch64 (ceph is currently disabled on SLES on s390x and ppc64le) (bsc#1030699) - Downgrade to version 0.6.4+103+suse.bcb5d0f4: * temporarily remove commit "multipathd: fix SIGUSR2 handling" until it's merged in official repo (bsc#1030699) * Tue Mar 21 2017 mwilck@suse.com - Spec file: disable librados for architectures for which ceph is not built - Spec file: enable librados by default for SLES12 SP3, disable it on Leap <= 42.1 - Update to version 0.6.4+104+suse.ac0df678: * multipathd: fix SIGUSR2 handling * Fri Mar 10 2017 mwilck@suse.com - Update to version 0.6.4+103+suse.bcb5d0f4: * changed to official github repo openSUSE/multipath-tools (no changes code-wise) * Fri Mar 10 2017 mwilck@suse.com - Spec file: Added dependency on sg3_utils (boo#1028857) * Wed Mar 01 2017 mwilck@suse.com - spec file changes: optional librados and libdmmp support * enabled by default on Factory and Leap (disable with --without-rados, --without-libdmmp) * disabled by default on SLES12 (enable with --with-rados, --with-libdmmp) * libdmmp0_1_0 and libdmmp-devel as separate packages * minor fixes for RPMLINT warnings - Update to version 0.6.4+102.0119472d: * rebased, code-wise identical to previous checkout * Tue Feb 28 2017 mwilck@suse.com - Update to version 0.6.4+102.df7d367e: * libmultipath/propsel: Do not select sysfs prioritizer for RDAC arrays (bsc#1004858) * Tue Feb 28 2017 mwilck@suse.com - Update to version 0.6.4+101.f01ef4da (SLES12 SP2 changes wrt upstream): * Make libdmmp build optional * multipath.rules: use -i flag to multipath * kpartx: create symlinks for dmraid devices * kpartx: Add udev compability rules for SUSE * libmultipath/checkers: make RADOS checker optional * multipathd: fixup check for new path states (bsc#1019798) * tur: Add pthread_testcancel() (bsc#101979) * kpartx: sanitize delete partitions (bsc#100869) * libmultipath: coalesce_paths: trigger uevent if nothing done (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400) * libmultipath: differentiate ACT_NOTHING and ACT_IMPOSSIBLE (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400) * libmultipath: reload map if not known to udev (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400) * libmultipath: sysfs_attr_set_value: use const char* (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400) * libmultipath: select_action: check special features separately (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400) * libmultipath: disassemble_map: treat aminio like assemble_map does (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400) * libmultipath: disassemble_map: skip no_path_retry check (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400) * libmultipath: setup_feature: handle "retain_attached_hw_handler" (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400) * libmultipath: setup_feature: print log msg if no_path_retry cant be set (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400) * libmultipath: setup_features: log msg if queue_if_no_path is ignored (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400) * multipathd: use weaker "force_reload" at startup (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400) * multipathd: imply -n if find_multipaths is set (bsc#1012910) * multipath: ignore -i if find_multipaths is set (bsc#1012910) * libmultipath: move suspend logic to _dm_flush_map (bsc#986838) * multipath -ll: set DI_SERIAL (bsc#991432) * libmultipath: use existing alias from bindings file (bsc#1005255) * libmultipath/discovery: do not cache 'access_state' sysfs attribute (bsc#1004858) * multipathd: issue systemd READY after initial configuration (bsc#1006469) * multipath: avoid crash when using modified configuration (bsc#1000914) * multipathd: Set CLI timeout correctly (bsc#999061) * libmultipath: Do not crash on empty features (bsc#994812) * libmultipath: fall back to search paths by devt (bsc#995645) * multipathd: set timeout for CLI commands correctly (bsc#999061) * Invalid error code when using multipathd CLI * multipath: do not check daemon from udev rules (bsc#986734) * Add support for "multipath=off" and "nompath" on kernel cmdline * multipathd: start daemon after udev trigger (bsc#98673) * multipathd.service: fixup Wants= and Before= statements (bsc#1019181, bsc#991742, bsc#986734) - Update to current upstream (0.6.4-65-ga2675025) * Avoid that reloading a map sporadically triggers I/O errors * fix udev rules for failed multipath devices * multipathd: allow resetting stats * multipathd: add messages on delayed path addition * multipathd: don't update priority of failed paths * libmultipath: cleanup orphan device states * libmultipath: add detect_checker option * kpartx: don't keep creating recursive partitions * multipath-tools: Introducing multipath C API * multipath-tools: sync valgrind.h with 3.12 upstream * multipath-tools: add availability of service-time and queue-length to multipath.conf.5 * multipath-tools: add availability of service-time and queue-length to multipath.conf.5 * Fill NVMe specific path info * Don't blacklist nvme * multipath-tools: fix misspellings * multipath-tools: git should ignore rej and orig files * Include sys/sysmacros.h * Tolerate modprobe failures in multipathd.service * multipath-tools: Remove trailing and leading whitespaces * multipath-tools: Perform socket client uid check on IPC commands. * multipath-tools: Set errno mpath_recv_reply() when failure * multipath-tools: New way to limit the IPC command length. * multipath-tools: libmultipath: Removed unused functions. * multipath-tools: libmultipath: fix gcc link failure on rcu_register_thread_mb. * multipath-tools: multipathd: Fix memory leak on load_config(). * [multipathd] Remove trailing whitespaces * multipathd: deterministic io throughput in multipath * Sat Feb 18 2017 kukuk@suse.com - Remove superfluous PreReq for insserv and fillup * Thu Sep 29 2016 mwilck@suse.com - Update to version 0.6.2+suse20160928.8939fb6 * Thu Sep 29 2016 hare@suse.de - Implement support for 'multipath=off' and 'nompath' kernel commandline options (bsc#1001691) * Wed Sep 28 2016 hare@suse.de - multipath: avoid crash when using modified configuration (bsc#1000914) * Mon Sep 19 2016 hare@suse.de - libmultipath: Do not crash on empty features (bsc#994812) - multipathd: Set CLI timeout correctly (bsc#999061) - Moved multipath-tools repository to github.com:/openSUSE/multipath-tools.git * Thu Sep 08 2016 hare@suse.de - Fixup glitch from patch 'fixup check from udev rules' (bsc#986734) - Remove 0001-libmultipath-fall-back-to-search-paths-by-devt.patch; integrated into git repository * Mon Aug 29 2016 jthumshirn@suse.com - libmultipath: fall back to search paths by devt (bsc#995645) * Fri Aug 26 2016 hare@suse.de - Fixup module name in /usr/lib/modules-load.d (bsc#986734) * Fri Aug 26 2016 hare@suse.de - multipath: fixup check from udev rules (bsc#986734) * Wed Aug 24 2016 hare@suse.de - multipathd: start daemon after udev trigger (bsc#986734) - Load device handler and multipath module at boot (bsc#991634) * Fri Aug 19 2016 hare@suse.de - Do not check daemon from udev rules (bsc#986734,bsc#990538) * Fri Aug 05 2016 hare@suse.de - Include fixes from upstream: * memory leak in orphan_paths * More hardware table cleanups * Add 'serial' keyword to weightedpath prioritizer - Set timeout for CLI commands correctly (bsc#990265) - Start daemon after udev trigger (bsc#991742,bsc#986734,bsc#990538) - multipathd.service: Fixup Wants= and Before= statements (bsc#991742, bsc#986734) * Thu Jul 28 2016 hare@suse.de - Include patches from upstream: * Cleanup hardware tables by removing default entries * More formatting fixes * Order keywords in multipath.conf.5 * Change default pgpolicy from 'failover' to 'group_by_prio' * kpartx: Fix check whether to detach a loop device * Fix partly traversed loop in coalesce_paths() * Fix memory leak in reconfigure() * Cleanup include header files * Bump version code to 0.6.2 - Fix multipath -l <devmap> without output (bsc#990480) - Fix spelling in a log message - Fix type of rcu_unregister() - Do not perform POSIX mutex operations inside a signal handler - Ensure that signals are delivered to the uxsock thread - Fix memory leak in path group policies - Update tarball to 0.6.2+suse20160728.d96f423 * Fri Jul 15 2016 hare@suse.de - Include patches from upstream: * Makefile cleanup * Update multipath.conf.5 * Update hardware tables * Whitespace cleanup - Fixup crash during shutdown (bsc#988539) - Update tarball to 0.6.1+suse20160715.3d44636 * Mon Jul 04 2016 jengelh@inai.de - Remove obsoletes spec sections * Mon Jul 04 2016 hare@suse.de - Move config accesses to use user-space RCU (bsc#987526) * Revert 'move filter_devnode under vector lock' * Revert the rework patch - Include patches from upstream: * Update hardware tables * Update kpartx manpage * Whitespace fixes * Include coverity fixes * Drop AUTHOR file - Update tarball to 0.6.1+suse20160704.6e52398 * Wed Jun 08 2016 lnussel@suse.de - fix service file to not pretend that this is the upstream version. Now labeled 0.6.1+suse20160603.9b920e3 - Fix BuildRequire to get systemd.pc from correct package (bsc#983167) - point rcmultipathd to /usr/sbin/service to avoid dangling symlink warning * Fri Jun 03 2016 hare@suse.de - Rework patch 'move filter_devnode under vector lock' (bsc#982348) * Mon May 30 2016 hare@suse.de - multipathd: Fixup definition of set_unlocked_handler_callback() - mpathcmd.h: Update Free Software Foundation address * Fri May 27 2016 hare@suse.de - Do not install header file with mode 755 * Wed May 25 2016 hare@suse.de - Update to latest upstream version 0.6.1 * Merge suse-specific patches * Drop multipath.conf.* files * Update to version 0.6.1 * multipathd: move 'filter_devnode' under vector lock * libmultipath: use poll() in uevent_listen() * Increase kpartx retries * Merge Dell MD3XXX hardware table entries * multipathd: Add 'sysfs' prioritizer (bsc#927040) * libmultipath: call get_vpd_uid() if no uid_attribute is set * multipathd: update defaults * Fri May 06 2016 hare@suse.de - Update to latest upstream version 0.6.0 (FATE#319406) * Update documentation * Fix memory leak and segfault in reconfigure * Add wwn keyword to weightedpath prioritizer * Use 64-bit int for command key * check partions unused before removing * print 'fail' when remove fails * add exclusive_pref_bi for alua prioritizer * kpartx: verify parition devices * multipathd: delay reloads during creation * Cut down alua prioritizer ioctls * Add 'ignore_new_boot_devs' option * Add libmpathcmd library and use it internally * retrigger uevents to try and grab uid * Update to version 0.6.0 * Fri Apr 15 2016 hare@suse.de - Port to latest upstream version (FATE#319406, FATE#320255) * kpartx: support device names with spaces * add raw format multipathd commands * make kpartx -d remove all partitions * Add find_multipaths option * Autodetect ALUA CLARiiON configurations * Delayed path reintegration * enable configuration directory * read-only bindings * Add deferred_remove support * correctly set partition delimiter on rename * Add overrides section to multipath.conf * Add additional path wildcards * Add force_sync option * Misc small patches * Thu Mar 24 2016 hare@suse.de - multipathd: do not flush maps on startup - Use find_path_by_dev() where possible (bsc#924316) - Fixup error return in store_path() (bsc#972329) - Do not display message 'invalid fd' * Tue Mar 08 2016 hare@suse.de - Fixup overzealous warning 'empty device number' (bsc#969857) * Wed Feb 17 2016 hare@suse.de - multipathd: fixup signal handling (again) - Revert 'trigger all devices on startup' - multipathd: print error message for invalid arguments - multipathd: block checkerloop during reconfiguration (bsc#946658) - libmultipath: correctly initialize pp->sg_id - multipathd: don't buffer output with systemd (bsc#954726) - multipath.rules: Do not forward partition events (bsc#954726) - libmultipath: improve uxlsnr handling (bsc#954726) - multipathd: do not realloc memory in uxlsnr (bsc#954726) - libmultipath: call get_uid() for all paths (bsc#935312) - multipathd: Do not print misleading message 'not found in pathvec' - multipathd: Do not update the paths vec when removing paths - multipathd: Do not switch paths on empty multipath tables (bsc#956349) - libmultipath: remove 'get_info' argument for adopt_paths() - libmultipath: ensure 'dev_t' is set when store paths (bsc#924316) - libmultipath: Do not store paths with empty dev_t (bsc#924316) - libmultipath: Do not store paths with empty device name (bsc#924316) - libmultipath: sysfs_set_rport_tmo still wrong (bsc#926588) - Add LIO-ORG/SUSE RBD backend hardware defaults (bsc#947845) - multipath: Reset alias if renaming fails (bsc#943157) * Fri Nov 06 2015 hare@suse.de - Fixes for md_monitor on zFCP (FATE#319070): * strict loop timings * multipathd: fixup a crash when invoking CLI commands * multipathd: implement 'show map $map format $format * Tue Aug 25 2015 hare@suse.de - Fixup hang in 'multipath -f' (bsc#941954) * Mon Aug 03 2015 hare@suse.de - Create package for SLE12-SP1. * Remove multipath-tools-0.5.0-sles12.diff.bz2 * Add multipath-tools-0.5.0-sles12-sp1.diff.bz2 - kpartx: parse emulated DASD devices - multipathd: Fixup queueing mode in 'show maps status' (bsc#933885) - multipathd: Accept zero-sized paths in ev_add_path - Always set DM_UDEV_DISABLE_LIBRARY_FALLBACK (bsc#933282) - libmultipath: Fixup 'DM_DEVICE_RELOAD' handling (bsc#933282) - libmultipath: correctly display checker status * Wed Apr 08 2015 hare@suse.de - Remove 'udev_sync' argument from dm_simplecmd (bsc#903001) - Ensure multipathd is started before systemd-udev-trigger * Tue Apr 07 2015 hare@suse.de - Only import ID_FS_XXX variables if not set (bsc#909358) - Fixup regular expression for HP MSA 2040 (bsc#920189) * Wed Mar 18 2015 hare@suse.de - Add dependency on systemd-udevd.service (bsc#903001) - Use ALUA for HP 3PAR (bsc#922105) - Add DX8700 S3 and DX8900 S3 defaults (bsc#921703) - Load all device handler modules on startup (bsc#908529) * Fri Mar 13 2015 hare@suse.de - libmultipath: make vpd page 0x80 optional (bsc#917963) - Add HP MSA 2040 to the hardware table (bsc#920189) - Revert 'Skip unhandled device types' (bsc#917701) * Thu Jan 29 2015 hare@suse.de - skip uninitialized devices during reconfiguration (bnc#908915) - memory overflow when printing help text (bnc#909742) * Tue Dec 16 2014 hare@suse.de - Do not automatically fall back to vpd uid generation - Improve vpd parsing - multipathd: trigger all devices on startup (bnc#901465) - Unset 'uid_attribute' on failure * Wed Dec 10 2014 hare@suse.de - libmultipath: Fall back to SG_IO if no UID could be assigned (bnc#908915) - Assign local priority for NAA VPD descriptor (bnc#907483) - libmultipath: finally fix dev_loss_tmo setting (bnc#889927) - libmultipath: Do not use 'sscanf' for parsing integers (bnc#889927) - devmapper: do not flush I/O for DM_DEVICE_CREATE (bnc#901809) - kpartx: handle more than 256 loop devices (bnc#898427) - multipathd: fixup locking in uev_remove_map() (bnc#901891) - multipathd: use global variable for uxsock timeout (bnc#900758) - multipathd: remove unused variable in cli_reconfigure() - Add %service calls for multipathd.socket
/usr/include/mpath_cmd.h /usr/include/mpath_persist.h /usr/lib64/libmpathcmd.so /usr/lib64/libmpathpersist.so /usr/lib64/libmultipath.so /usr/share/doc/packages/multipath-tools-devel /usr/share/doc/packages/multipath-tools-devel/libmpathpersist-example.c /usr/share/man/man3/mpath_persistent_reserve_in.3.gz /usr/share/man/man3/mpath_persistent_reserve_out.3.gz
Generated by rpm2html 1.8.1
Fabrice Bellet, Sun Jun 9 12:42:04 2024